Hard Bar Sport

HD Sport with diagonal bar

HARD BAR SPORT

Everything the original Hard Bar is...
.... and much more.

Sport Bar at left shown with optional diagonal brace

The Hard Dog Sport uses the same design as the Hard Bar,
but with the addition of larger bolt-in main loop mounting plates and two rear braces that bolt in.

Additional diagonal and/or harness bar (and leather cover) can be added at the time of order.

Drive a Little - Save A Lot Special

We have one new Polished SS Sport for the 1990-1997
(TM-510). If you live in Northern California and are willing to pick it up you can save some bucks.
Save $115 ($45 off the retail and $70 on S&H)
Please call us at (925) 370-6485 to place the order and to make arrangements for pick-up.
Not available for purchase online.

PLUS - With the purchase of a Hard Bar Sport or Hard Core Bar for 90-97 Miata receive
a FREE Window Protector Tube. Ideal for use with roll bars. A $21 value.

The Double Diagonal Hard Dog available in both the Sport and Core models.
See pricing below

Double Diagonal

Key Features

	Does not interfere with convertible top operation.
	Allows for complete use of hard top.
	Fits full height and width of the interior.
	Is the tallest design available.
	Allows for full use of driver and passenger seat travel and tilt.
	Constructed of high quality 1020 DOM tubing (1 1/2 diameter by .120 wall) with 3/16 inch mounting and backup plates.
	Standard powder coated semi-flat black finish. Polished Stainless Steel available.
	Complete installation instructions sheet included along with all other hardware needed.
	Design approved by Car Guys (with optional main hoop diagonal).

See notes below about special considerations of the 1999-2005

Installation Information (photo link)

	Need to cut some of the sheet metal for the back braces.
	The plastic panels covering the seat belt towers must be trimmed. See below

bar-cut1.jpg (12628 bytes)

	Tools Needed: 16mm (or 5/8 socket) wrench 2 - 9/16 wrenches 10 mm wrench or deep socket, Phillips head screwdriver, Tin snips (to trim panels), T-40 Torx Drive 6 pt., Drill & long 3/8" drill bit, Jack and Jack Stands, 3/4" Hole Saw (some ABS cars)
	Complete Instructions in HTML
	PDF of Instructions

Note the differences between
the Hard Bar and
the Sport Bar.

The Hard Bar (top) has no back bracing while the Sport Bar does

Otherwise the bars are almost the same.

The Sport Bar shown with
diagonal and harness bars.

Hard Dog Sport

The Hard Dog Sport Roll Bar for the 1999-2005 Miata

The Hard Dog Sport for the 1999-2005 has some special considerations.

99 Sport Bar

	The Sport Bar interferes a bit with the wind blocker. You can either trim about 2 inches off both ends of the blocker or place addition mounting holes for the blocker and move it forward a bit.
	Another option is to leave the blocker in either the up or down position all the time.

99 Sport Bar from back

Frequently Asked Questions about Hard Dog Roll Bars

Also check out the instructions for modifying your boot for your roll bar.

Delivery
Note - Because of the many different models of Hard Dog roll bars, they are shipped directly from the factory per your order. Expect at least 2 to 6 weeks for delivery (Leather options may take longer).

Covers/Wraps - If ordered at the same time as the roll bar, will have the cover partially installed. The padding will be installed and the wrap itself will not be attached, this is to avoid them being damaged in shipment.

Description	Stock #	Price	S/H**
'90 - '97 (M1) Hard Dog Sport Bars
Hard Bar Sport Black Powder Coated Finish	TM-506	$315	$70	">
w/Double Diagonal	TM-506-DD	$385	$70	">
w/Single Diagonal	TM-507	$350	$70	">
w/Harness Bar	TM-508	$350	$70	">
w/Single Diagonal & Harness Bar	TM-509	$385	$70	">
w/Double Diagonal & Harness Bar	TM-509-DD	$420	$70	">
Hard Bar Sport Black Powder Coated Finish w/special Double Diagonals raised for glass rear window	TM-506-DDG	$405	$70	">
Hard Bar Sport Black Powder Coated Finish w/special Single Diagonal raised for glass rear window	TM-506-G	$370	$70	">
Black Leather cover with Custom Formed High Density Padding	TM-535	$125	$15 * note below	">
Black Vinyl cover with Custom Formed High Density Padding	TM-537	$85	$15 * note below	">


Hard Bar Sport Polished Stainless Steel	TM-510	$920	$70	">
w/Double Diagonal	TM-510-DD	$1140	$70	">
w/Single Diagonal	TM-512	$1030	$70	">
w/Harness Bar	TM-513	$1120	$70	">
w/Single Diagonal & Harness Bar	TM-514	$1230	$70	">
w/Double Diagonal & Harness Bar	TM-514-DD	$1340	$70	">
1999-2005 (M2) Hard Dog Sport Bars
1999-2005 Hard Bar Sport Black Powder Coated	TM-520	$315	$70	">
w/Double Diagonal	TM-520-DD	$385	$70	">
w/Single Diagonal	TM-522	$350	$70	">
w/Harness Tabs	TM-523	$350	$70	">
w/Single Diagonal and Harness Tabs	TM-524	$390	$70	">
1999-2005 Sport with Double Diagonal & Harness Tabs	TM-524-DD	$420	$70	">
1999-2005 Hard Bar Sport Stainless Steel	TM-526	$920	$70

HARD BAR SPORT

Everything the original Hard Bar is... .... and much more.

Sport Bar at left shown with optional diagonal brace

The Hard Dog Sport uses the same design as the Hard Bar, but with the addition of larger bolt-in main loop mounting plates and two rear braces that bolt in. Additional diagonal and/or harness bar (and leather cover) can be added at the time of order.

The Double Diagonal Hard Dog available in both the Sport and Core models. See pricing below

Key Features

Does not interfere with convertible top operation.

Allows for complete use of hard top.

Fits full height and width of the interior.

Is the tallest design available.

Allows for full use of driver and passenger seat travel and tilt.

Constructed of high quality 1020 DOM tubing (1 1/2 diameter by .120 wall) with 3/16 inch mounting and backup plates.

Standard powder coated semi-flat black finish. Polished Stainless Steel available.

Complete installation instructions sheet included along with all other hardware needed.

Design approved by Car Guys (with optional main hoop diagonal).

Installation Information (photo link)

Need to cut some of the sheet metal for the back braces.

The plastic panels covering the seat belt towers must be trimmed. See below

Tools Needed: 16mm (or 5/8 socket) wrench 2 - 9/16 wrenches 10 mm wrench or deep socket, Phillips head screwdriver, Tin snips (to trim panels), T-40 Torx Drive 6 pt., Drill & long 3/8" drill bit, Jack and Jack Stands, 3/4" Hole Saw (some ABS cars)

Complete Instructions in HTML

PDF of Instructions

Note the differences between the Hard Bar and the Sport Bar.

The Hard Bar (top) has no back bracing while the Sport Bar does

The Sport Bar shown with diagonal and harness bars.

The Hard Dog Sport Roll Bar for the 1999-2005 Miata

The Sport Bar interferes a bit with the wind blocker. You can either trim about 2 inches off both ends of the blocker or place addition mounting holes for the blocker and move it forward a bit.

Another option is to leave the blocker in either the up or down position all the time.