ClearView
|
|
|
|
| Now you can get a single hoop roll bar built to the same high quality standard as the Boss Frog Double Hoop roll bar that has undergone destructive testing and gives you an unobstructed view of what's behind. | |
|
|
|
|
Works great with hardtops too! |
|
| As an added bonus, it works with OEM rear glass windows and Robbins Top aftermarket glass rear windows for all years of Miata. | |
And just like the Boss Frog Double Hoop roll
bar, to ensure that the bar would be up to withstanding a rollover, a destructive
test of the roll bar was conducted.
Following the specifications set forth by both the Sport
Car Club of America (SCCA) and FIA guidelines during
the test, three simultaneous loads, 7.5G vertical, 5.5G front, and 1.5G
side, were
applied with a combined load of over 13 tons. TheBoss
Frog ClearView roll bar passed the destructive test with flying colors.
The ClearView stayed completely intact, with nearly zero deflection. As
required by SCCA regulations, a registered engineer witnessed the
test, and
has issued
a report of his findings. In short he concluded that the Boss Frog
ClearView Roll Bar meets the specifications and intent of both SCCA and FIA
specifications. |
|
|
|
|
|
The Boss Frog Single Hoop ClearView Roll Bar is the only single hoop roll bar available for your Miata to be tested under such stringent testing procedures. And if you are looking for a roll bar that looks great as well as protects, all Boss Frog roll bars feature TIG welds instead of MIG welds at are on all other roll bars. Click here to find out why that is important. Can you see any reason to install any other roll bar in your Miata? Go with the Frog! |
|
|
|
Boss Frog Pad and Cover for the Clear View |
 |
 |
 |
|
Note: Some trimming of the vinyl may be necessary for a custom look and fit. |
|
Key Features
|
Installation Information
Installation
Instructions
|
||||||||||||||||||||||||||||||||
Seatbelt AdaptersHave trouble with the seatbelt retracting? These bolt-in adapters help the seatbelts work better. Replaces the stock seatbelt guides, which need to be cut off. For use on all Boss Frog rollbars. Click here for installation instructions. Included FREE with all Boss Frog Clearviews & Double Hoop bought from Team Miata after January 1, 2006. |
|
||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||
Delivery
Note - These roll bars are shipped
directly from the manufacturer.
These items can not be shipped to APO/FPO addresses.
| Description | Stock # | Price | S/H** |
|
|---|---|---|---|---|
Boss Frog Single Hoop ClearView - Black Powder Coated Finish |
BF-1001-BPC | $495 |
$70 |
|
Boss Frog Single Hoop ClearView - Silver Powder Coated Finish |
BF-1001-SPC | $535 |
$70 |
|
Boss Frog
Single Hoop ClearView - Polished Stainless
Steel |
BF-1001-SS |
$900 |
$70 |
|
Boss Frog
Single Hoop |
BF-1001-UF | $470 |
$70 |
|
|
Boss Frog
SFI Padding for Clearview Single Hoop |
BF-1001-PD | $50 | $10 | |
| Vinyl Cover for Clearview roll bar - Black (requires use of SFI padding to fit properly, not included) | BF-1001-VC | $90 |
$10 |
|
|
Seatbelt Adapters (per pair)
Black powdercoated For BF rollbars bought before 11/1/2005 |
BF-SBAD | $35 |
$10 |
|
Please email or call for a quote.
