Miata Trunk Light Conversion Kit
Converts your almost useless License Plate Lamp on
the '99 - '01 Miata into a truly useful Trunk Light
(One that stays on without the
headlights needing to be turned on) |
 |
Now use those trunk lights
the way they were meant to be used - to see in your trunk at night!
|
The designers at Mazda are pretty good. They managed to create
a darn good roadster. Engine, suspension, handling - all great. And the M2
(1999+) models are even better than the original. But while these guys were out on
the tracks fine tuning the Miata, they missed a few little details. We won't
even get started about the poorest excuse for a cup holder ever seen in a modern
car (the 2001 is a bit of an improvement), but what about that "trunk light" that only works when the
headlights are on. Give us a break guys!
Well there is always room for improvement even on the best
cars, so we are offering a kit that turns the license plate/trunk light into a truly
useful trunk light. One that DOESN'T have to have the headlights on for you to
see what is in your trunk at night.
This kit doesn't add a light to your Miata, but instead
takes the perfectly good set of existing lights and makes them useful.
Key Benefits
 |
Lights the entire trunk area
|
|
Works without the ignition key needing to be inserted
|
|
Great for Miatas equipped with Remote Keyless Entry (RKE)
|
|
Trunk appears completely stock
|
|
Works with trunk saddlebags
|
|
No additional bulbs to worry about
|
|
Needs no batteries
|
|
Dual lighting assures you of continued lighting even if one bulb burns out
|
|
Besides the wiring harness, you get a special switch, screws, drilling
jig, drill bit, and attaching straps.
No painted surfaces are drilled
For '01 LS models with Remote
Keyless
Entry there is NO drilling!
|
|
|
Installation Information
| Complete photo
instructions
Tools
required: small flat screw driver, 10 mm socket or wrench, wire
strippers or knife, pliers, hammer, drill, electrical tape, pencil
or pen for marking.
|
|
Takes about 45 minutes to an hour to install
|
|
Requires two small holes to be drilled into the lock
mechanism (drill bit and drill jig included)
There is NO drilling
into the sheet metal of your Miata.
- For '01 LS models with Remote Keyless
Entry there is NO drilling at ALL!
|
|
OEM look and operation when finished
|
|
Also check out these other bright ideas:
Lights
Up! - An auto timer for your interior lighting
2002 & newer owners! Check your trunk, you probably won't need this, rumor has it that
Mazda finally fixed this oversight.
Pricing -
| Description |
Stock
# |
Price |
|
Trunk View
Miata Trunk Light Conversion Kit
For '99-'01 Miatas Only
('01 model WITHOUT Factory Remote Keyless Entry)
|
TM-285
|
$35
|
|
| Special
Note for '99- 01 owners with Aftermarket Remote Keyless Entry Systems -
Almost all aftermarket alarm systems offer Remote Keyless Entry Systems activated
through the alarm system. If your car has one of these added and you want
to add the Trunk View, use TM-285 and NOT the Trunk View below. We have
installed the TM-285 in our Miatas that have Clifford Alarm Remote Keyless
Entry
for the trunk and it works perfectly. |
Trunk View RKE
Miata Trunk Light Conversion Kit
('01 LS Miata WITH Factory Keyless Entry)
|
TM-285A
|
$35
|
|
| Special
Note for '01 owners - The standard Trunk View cannot be installed
with the factory remote keyless entry system that is standard on the '01 LS
package - The good news is that the kit that works with the Remote
Keyless
Entry has an extra part, but requires NO drilling making it a bit
easier to install. This also applies to any 2001 that has the Remote Keyless
Entry as an option even if not an LS. If your Miata in NOT a 2001 LS and
has an aftermarket Keyless system installed use TM-285. |
|
|
