Hard Dog Roll Cage

[ Roll Bar FAQs ] [ The Hard Bar ] [ Hard Bar Sport ] [ Hard Core Bar ] [ Extreme Bar ] [ Deuce Bar ] [ Hard Dog Hitch ] [ Roll Cage ] [ Racing Harness ] [ Hard Dog Z3 ]

THE HARD DOG ROLL CAGE

No Compromising Here!

Looking to get into some serious racing?
Then the Hard Dog Roll Cage is the only way to go!
No Excuses, No Compromises.

Proudly Made in the USA

Key Features

	Does not interfere with convertible top operation.
	Fits full height and width of the interior.
	Is the tallest design available and works with the hard top
	Constructed of high quality 1.5" OD X .095 DOM tubing per SCCA Showroom Stock rules (HD-CG95). 3 heavier models available, see below.
	For 1999-2005 glass rear window must be removed per SCCA rules
	Complete installation instructions sheet included along with all other hardware needed
	Works with all years!

Installation Information

	Full Roll Cage takes about 8 hours to install
	Not for the faint of heart
	The plastic panels covering the seat belt towers must be trimmed 1 3/8 inches from the top of the tower, down. May also be necessary to trim where the seat belt comes out of the tower. Must cut sheet metal on back panel.
	Highly recommend professional installation.
	Not recommended for Miatas that are daily drivers because it makes getting in and out of the Miata difficult.

Frequently Asked Questions about Hard Dog Roll Bars

Note: All cages MUST be shipped to a business location that can accept Large Freight deliveries.

Pricing
Note - Roll Cages are built at the time of order. Expect at least 3 to 5 weeks for delivery.

Rear Section - section that is a "normal roll bar"
Front Section - section forward of that, that goes between the windshield the the rear section.

Description	Stock #	Price	S&H**
Hard Dog Cage Black Powder Coated Finish Both Sections - 1.5 OD X .095" Wall Tubing SCCA APPROVED MINIMUM	HD-CG95	$850	$140	"> ">
Hard Dog Cage Black Powder Coated Finish Front Section - 1.5 OD X .095" Wall Tubing Rear Section - 1.5OD X .120" Wall Tubing	HD-CG20	$880	$140	"> ">
Hard Dog Cage Black Powder Coated Finish Front Section - 1.5 OD X .095" Wall Tubing Rear Section - 1.75OD X ..095" Wall Tubing	HD-ACG95	$850	$140	"> ">
Hard Dog Cage Black Powder Coated Finish Front Section 1.5 OD X .095" Wall Tubing Rear Section - 1.75OD X .120" Wall Tubing	HD-ACG20	$880	$140	"> ">
Add-On Front Sections (for existing Hard Dog Sport or Core) Welding Required
Add-On Front Section .095 Wall for 90-97 Miata (Welding Required) Please put what rear section bar you have in the comments field.	HD-FR95	$440	$140	"> ">
Add-On Front Section .120 Wall for 90-97 Miata (Welding Required) Please put what rear section bar you have in the comments field.	HD-FR20	$460	$140	"> ">
Extras
Traditional Type Roll Bar Padding 30 inch stick - in Black	HD-FPAD-B	$10	$15*	"> ">
Traditional Type Roll Bar Padding 30 inch stick - in Red	HD-FPAD-R	$10	$15*	"> ">
High Density SFI Race Type Roll Bar Padding - Meets SCCA Requirements & used by NASCAR 30 inch stick - in BLACK only	HD-HDSFI	$20	$15*	"> ">

* Shipping charge only applies if not ordered at the same time as a roll bar.
** Shipments to Alaska & Hawaii and US Territories will be charged actual shipping charges.

Autotop100.com
We are upgrading the sales cart on the site so you may experience some problems placing orders.
If your experience any problems, PLEASE - Call in your orders at 888 326-6428
8am-4pm Pacific Time Monday thru Friday.
We accept VISA & Mastercard Only

View Cart

THE HARD DOG ROLL CAGE

No Compromising Here!

Looking to get into some serious racing?
Then the Hard Dog Roll Cage is the only way to go!
No Excuses, No Compromises.

Key Features

Does not interfere with convertible top operation.

Fits full height and width of the interior.

Is the tallest design available
and works with the hard top

Constructed of high quality 1.5" OD X .095 DOM tubing per SCCA Showroom Stock rules (HD-CG95).
3 heavier models available, see below.

For 1999-2005 glass rear window must be removed per SCCA rules

Complete installation instructions sheet included along with all other hardware needed

Works with all years!

Installation Information

Full Roll Cage takes about 8 hours to install

Not for the faint of heart

The plastic panels covering the seat belt towers must be trimmed 1 3/8 inches from the top of the tower, down. May also be necessary to trim where the seat belt comes out of the tower. Must cut sheet metal on back panel.

Highly recommend professional installation.

Not recommended for Miatas that are daily drivers because it makes getting in and out of the Miata difficult.

Frequently Asked Questions about Hard Dog Roll Bars

Note: All cages MUST be shipped to a business location that can accept Large Freight deliveries.

Pricing
Note - Roll Cages are built at the time of order. Expect at least 3 to 5 weeks for delivery.

Rear Section - section that is a "normal roll bar"
Front Section - section forward of that, that goes between the windshield the the rear section.

Add-On Front Sections (for existing Hard Dog Sport or Core)
Welding Required

THE HARD DOG ROLL CAGE

No Compromising Here!

Looking to get into some serious racing? Then the Hard Dog Roll Cage is the only way to go! No Excuses, No Compromises.

Key Features

Does not interfere with convertible top operation.

Fits full height and width of the interior.

Is the tallest design available and works with the hard top

Constructed of high quality 1.5" OD X .095 DOM tubing per SCCA Showroom Stock rules (HD-CG95). 3 heavier models available, see below.

For 1999-2005 glass rear window must be removed per SCCA rules

Complete installation instructions sheet included along with all other hardware needed

Works with all years!

Installation Information

Full Roll Cage takes about 8 hours to install

Not for the faint of heart

The plastic panels covering the seat belt towers must be trimmed 1 3/8 inches from the top of the tower, down. May also be necessary to trim where the seat belt comes out of the tower. Must cut sheet metal on back panel.

Highly recommend professional installation.

Not recommended for Miatas that are daily drivers because it makes getting in and out of the Miata difficult.

Frequently Asked Questions about Hard Dog Roll Bars

Note: All cages MUST be shipped to a business location that can accept Large Freight deliveries.

Pricing Note - Roll Cages are built at the time of order. Expect at least 3 to 5 weeks for delivery. Rear Section - section that is a "normal roll bar" Front Section - section forward of that, that goes between the windshield the the rear section.

Add-On Front Sections (for existing Hard Dog Sport or Core) Welding Required

Looking to get into some serious racing?
Then the Hard Dog Roll Cage is the only way to go!
No Excuses, No Compromises.

Is the tallest design available
and works with the hard top

Constructed of high quality 1.5" OD X .095 DOM tubing per SCCA Showroom Stock rules (HD-CG95).
3 heavier models available, see below.

Pricing
Note - Roll Cages are built at the time of order. Expect at least 3 to 5 weeks for delivery.

Rear Section - section that is a "normal roll bar"
Front Section - section forward of that, that goes between the windshield the the rear section.

Add-On Front Sections (for existing Hard Dog Sport or Core)
Welding Required