Hard Dog Z3

Key Features

	No boot cover alterations required.
	Allows full seat travel and tilt (main hoop diagonal limits passenger seat)
	Available with powder coat finish or polished stainless steel
	3/16" Mounting and back-up plates
	Does not interfere with convertible top operation.
	Includes rear brace crossbar for shoulder harness mounting.
	Fits full height and width of the interior.
	Constructed of high quality 1020 DOM tubing (1 3/4" diameter by .125 wall )

Complete installation instruction sheet included along with all other hardware needed.

Complete Installation Instructions

z3-1.jpg (18574 bytes)

Installation Information

	Must drill holes in several places.
	Must cut panels and plastic

Tools Needed:
   16mm (or 5/8 socket) wrench
    5/16 Allen wrench
   10 mm wrench or deep socket
   2 - 9/16 wrenches
   1.75" hole saw
   Drill with 3/8 drill bit
   2 #2 Phillips screwdriver
          - 1 long & 1 short
   Half round file
   Aviation snips for cutting panels
   Phillips head screwdriver
   T-40 Torx Drive 6 pt.
   Drill & long 3/8" drill bit
   Jack and Jack Stands
   Heat gun for fitting plastic
   interior panels
   C-Clamp for clamping back-up
   plates while drilling
   Safety glasses

Sorry but the power top cylinder will have to go to make room for the bar.

THE HARD DOG
Z3 BAR

The Hard Dog Z-3 is designed just for those who want to maintain a dual purpose car for street and track use.

Key Features

Installation Information

If your Z3 had the Factory Double hoops (usually 98 and later cars), in order to make the trim look right, the interior panels would have to be replaced with those from an earlier model that didn't come with the hoops.

Frequently Asked Questions about Hard Dog Roll Bars

Pricing
Note - Because of the many different models of Hard Dog roll bars, they are shipped directly from the factory, per your order. Expect at least 2 to 6 weeks for delivery.

THE HARD DOG Z3 BAR

The Hard Dog Z-3 is designed just for those who want to maintain a dual purpose car for street and track use.

Key Features

Installation Information

If your Z3 had the Factory Double hoops (usually 98 and later cars), in order to make the trim look right, the interior panels would have to be replaced with those from an earlier model that didn't come with the hoops.

Frequently Asked Questions about Hard Dog Roll Bars

Pricing Note - Because of the many different models of Hard Dog roll bars, they are shipped directly from the factory, per your order. Expect at least 2 to 6 weeks for delivery.

THE HARD DOG
Z3 BAR

Pricing
Note - Because of the many different models of Hard Dog roll bars, they are shipped directly from the factory, per your order. Expect at least 2 to 6 weeks for delivery.